Bikes & Gear
Breaking a sweat for more than 90 minutes? Drink Nuun Endurance! When you work out longer than 90 minutes your body needs more than water and electrolytes to keep up. Nuun Endurance is the perfect blend of electrolytes and carbohydrates to keep you hydrated and go longer and stronger all dang day. - Mix 1-serving into 16 oz. of water and consume while you work out for sustained hydration. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
- As a hybrid construction it combines the advantages of a hard shell case with the properties of a soft bag - Fits most: Cross Country, All Mountain, Enduro, Freeride, Downhill bikes up to 29", Gravel, Road and Triathlon bikes - New polycarbonate bike block for fixation included - For safe transport of road bikes and triathlon bikes, you need the road bike adapter, road bike aluminium stand or bike stand - 285L, 9100g - 138 x 39 x 85cm - Maximum wheel base: 126cm
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
- Service parts for E-13 chainguides
- Lower slider replacement parts for E-13 chainguides
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
$17.00 - $23.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Stay hydrated and show your allegiance to speed with Zipp's Water Bottle. They're made by Purist and feature bold Zipp logos so you're always repping.
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
- Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
Zipp's Speed Box 2.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 2.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
- Protection for your wheels and tires in transit - Durable and elastic lycra-nylon blend material for long-term reliability - Fits 700c tires from 23c to 30c
Zipp Speed Weaponry Cartridge Bearings
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Zipp is proud to partner with Silca to offer a premium valve extender with a stylish innovative design that eliminates annoying rattle between the extender and rim valve hole. - 24mm extender gasket removes rattle - Machined 6066-T6 aluminum - When installed on Zipp butyl tubes with 37mm valves, compatible with Zipp 303, 404 and 808 rims. - Compatible with all tubes with removable valve core. Places Presta valve at top of extender for easy access for inflation. - 34mm for 32-49mm rim depth including Zipp 303 – 2g - 45mm for 50-65mm rim depth including Zipp 404 – 2.7g - 60mm for 66-80mm rim depth including Zipp 808 – 3.7g - 75mm for 81-95mm rim depth – 4.7g - Kit includes two extenders for the bike, one extender for the spare tube. - (34mm kit includes one extender tool)
$71.99 - $129.99
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant
Page 1 of 108 Next page